HOW to USE: ST-Stops by Mangrove Products®
Installation
- Locate your outboards hydraulic steering rams (there should be 2 per outboard)
- Turn your steering wheel to center your outboard, this will enable you steering rams to be equal in length.
- Take one ST-Stop and apply to one-ram at a time. When apply the ST-Stop apply pressure and lead with the corner of the ST-Stop until you hear the ST-Stop click into place evenly.
- Done (Now you are ready to trailer your boat and outboard)
Removal
- Ensure your outboard is centered (Please remember to remove the ST-Stops prior to launching your boat due to your inability to steer the boat correctly when they are on the rams)
- Apply upward or downward pressure to the ST-Stops to unlock the inner grooves from the metal ram. Doing so with a corner first can simplify this process
- When removed you are ready to launch the boat OR put the ST-Stops back into your dry box or storage compartment.
Troubleshooting
- If you are unable to fit your ST-Stop on one specific side, please refer back to centering your outboard to open space to opposite ram.
- When removing your ST-Stops and they appear "stuck" in place, please refer back to centering your outboard to open space between ram and hydraulic system.
Additional Questions
Call Mangrove Products® Support +1 (954)-253-8883 We are here to help.